WECO Discovery 160T Tig Welder

Welding Current 5 - 160A

Duty Cycle 40 % @ 160A
100 % @ 130A

O.C.V 65V

Main Power Supply 230v (+,-) 15%

Main Fuse 25A

Protection IP23

Insulation B

Norms N60974 - 1/ EN 50199

Dimensions 16 x 40 x 26cm

Weight 9kg

Functions Hot start, anti stick, arc- force, pre- gas, pulse, slope up & down , final current, post gas.

Features view features list

MMA/ Arc Welding

* HOT START: Managed by the microprocessor in WECO inverters according to the welding current, hot start consists of a rise in the initial current to allow for better striking of the electrode.

* ARC FORCE: Regulated by the microprocessor according to the welding current, arc force entails a rise in current to facilitate detachment of droplet transfer.

* ANTI STICK: The WECO anti stick function causes the welding current to be blocking in the event that the electrode should stick to the piece.

TIG

* LIFT ARC: All “E” Series inverters (and as an option in the “T” Series inverters) use touch- and- lift tungsten start. This function is available in both 2- stroke and 4- stroke in the “T” Series.

* HIGH FREQUENCY: High frequency start is available in the “T” Series inverters. (Lift Arc remains as an option). This function is available in both 2-stroke and 4- stroke in the “T” Series.

* PULSE: Pulse allows the current to be pulsed between values of amps selected, mitigated by determined or selected frequency (Hz). WECO inverters have pulse available in all models of TIG inverters.

* In the “T” Series the pulse can be varied in terms of base current, peak time, base time and frequency (5- 250 Hz).

* SLOPE UP/ DOWN: Available for all WECO “T” Series machines the slope function allows the machine to increase or decrease current to a operator selected time.

PRE-AND POST-GAS: Available for all WECO “T” Series machines the pre-and post-gas is adjustable.