Home > Welding Torches & Consumables > Mig Consumables > MIG Welding Wire > Hardfacing Wires > Welding Alloys Hardface T-O, T-G

Welding Alloys Hardface T-O, T-G

- Hardface T (30-35 HRC) Used for hardfacing and rebuilding components subject to metal-to-metal wear and moderate abrasion. The weld deposit is typical of a low alloy steel and is used for heavy multi-layer build-up work. The weld deposit is machinable.

larger imageMove mouse over the image to magnify

Refer a friend

Ask a question about this product

Hardface T is a cored wire used for hardfacing and rebuilding components subject to metal - metal wear and moderate abrasion. The weld deposit is typical of a low alloy steel and is used for heavy multi-layer build-up work. The weld deposit is machinable.

T-O - Open Arc (Self Shielded - Gasless) Wire
T-S - Submerged Arc Wire
T-G - Gas Shielded Wire

TYPICAL APPLICATIONS
Build-up of earthmoving equipment such as tractor rollers, idlers, chains and drive sprockets, excavator pads, electric shovel track pads, electric shovel track carrier rolls, steel shafts, trunnions, gears, crane wheels, mine car wheels, steel mill rolls, dredge pins, dredge links, mixer parts, rail car couplings, steel mill roll couplings and any components subject to metal - metal wear.

TYPICAL CHEMICAL COMPOSITION
C - 0.14%, Mn - 1.5%, Si - 0.5%, Cr - 1.6%, Mo - 0.35%

TYPICAL HARDNESS
30 - 35 HRC
295 - 335 HB

AVAILABLE SIZES
1.2mm, 1.6mm, 2.0mm, 2.4mm, 2.8mm, 3.2mm

For more information please view attached info sheet, or call us for advice on what would be best for your application